深埋矿体移动带三维圈定方法及应用

针对深埋矿山开采移动带二维圈定方法工作量大、精度低且难以满足日益增长的经济效益需求的问题，提出了一种深埋复杂矿体移动范围三维确定方法。结合沙岭金矿千米深井工程实例，在移动范围确定过程中，借助先进的3D建模技术获得三维矿山模型。该模型可以实现各类地质体的可视化，直观地展示其形态与产状，清晰地反映各构成因素间的相互关系。在3D模型中截取的特征剖面与经典移动带圈定岩移参数获取方法相结合，能轻松获得各特征剖面上的岩移参数值。通过给定的岩移参数值进而确定各特征剖面上的地表移动边界点，将各移动边界点连接即可实现矿山移动范围的圈定。研究结果表明，基于三维地质建模技术的移动带圈定方法合理可行，确定的纱岭金矿地表移动带能够兼顾安全生产与经济效益，为矿山生产开发奠定了有益基础，为类似矿山提供了有益借鉴。     

Measurement of solubility and diffusion coefficients of ethylene in solid and molten low-density polyethylene with different melt indices

The diffusion behavior of ethylene in polyethylene is of great importance for the polymerization and degassing of polyethylene (PE) industry. Based on the gravimetric sorption and desorption measurement approach, an intelligent gravimetric analyzer is applied to obtain the solubility and diffusion coefficients of ethylene in solid low-density PE (LDPE) with different melt indices at 30°C to 70°C, 0 to 4 atm and in molten LDPE at 160°C to 230°C, 0 to 4 atm, respectively. Results indicate that both the solubility and diffusion coefficients of ethylene in solid LDPE are smaller than those in molten LDPE, while the dissolution enthalpy and diffusion activation energy of ethylene in solid LDPE are higher. In addition, one- and two-dimensional diffusion models are built and the effects of particle size, polymer properties, and operation conditions are systematically investigated on the diffusion behaviors of ethylene in solid and molten LDPE.     

Thermal conductivity and mechanical properties of polyimide composites with mixed fillers of BN flakes and SiC@SiO2 whiskers

Polyimide (PI) composites with mixed fillers of BN flakes and SiC whiskers exhibit enhanced thermal conductivity and mechanical properties. In order to improve dispersion and interaction of these mixed fillers within the PI matrix, BN flakes were modified by a titanate coupling agent while SiC whiskers were oxidized at 750°C for 60 minutes to produce SiC@SiO₂ followed by silane coupling agent modification. PI composites reached a maximum thermal conductivity of 0.95 W/m K at volume fraction of mixed fillers of 27.6 vol% when the weight ratio of BN flakes to SiC@SiO₂ whiskers was 1:4. The enhanced thermal conductivity is likely attributed to the formation of heat conductive networks constructed by BN flakes and SiC@SiO₂ whiskers and the improved interfacial affinity between fillers and matrix. The optimized Nielsen-mold confirms the distribution and morphology of fillers affect the thermal conductivity of PI composites. In addition, SiC whiskers enhanced the mechanical property of PI composites and the influence of fillers on the mechanical property was further elaborated.     

Prediction of process parameters of water-assisted injection molding based on inverse radial basis function neural network

Because of the introduction of new processing parameters in water-assisted injection molding (WAIM), processes control has become more difficult. First, design of experiment (DOE) was carried out by using optimized Latin hypercubes (Opt LHS). On the basis of this, computational fluid dynamics (CFD) method was used to simulate and calculate hollowed core ratios and wall thickness differences of cooling water pipe at different positions. Then inverse radial basis function (RBF) neural network model reflecting the fitting relationship between processing parameters and molding quality was established, and accuracy of the model was detected by cross validation. Finally, expected molding quality was applied to predict processing parameters, and the obtained molding quality under the predicted processing parameters was verified by computer aided engineering (CAE) simulation and experimental methods. The results showed that mean relative precisions of processing parameters such as melt temperature, delay time, short shot size, water pressure, and mold temperature for inverse RBF model were 98.6%, 93.6%, 98.5%, 93.9%, and 97.9%, respectively, which met the accuracy requirements. Furthermore, compared with expected values of hollowed core ratios and wall thickness differences, the average errors of CAE and experiment were 2.3% and 4.9%, respectively.     

Observations on the oral organelle,cytopharynx, and subpellicular structure of a Dileptus sp.

We used scanning electron microscopy (SEM) and transmission electron microscopy (TEM) to observe the oral organelle, cytopharynx, and subpellicular structure of a Dileptus sp. The main results were as follows: (a) the cytostome was located on the ventral surface of the base of the beak, surrounded by a periportal matrix that integrated 135 microtube bundles. When these microtube bundles contract, radially arranged into a disk, the cytostome was closed. When these microtube bundles were stretch, they fell into the cytostome and opens. The diameter of the cytostome was about 16 μm regardless of its closure or opening, indicating that the contraction or elongation of these microtube bundles did not change the size of the cytostome, which was only related to whether it blocked the cytostome, thus determining the opening and closing of the cytostome. There were many microtube bundles on two sides of the feeding trough, which could widen or narrow the feeding trough and facilitate beak feeding. (b) The cytopharynx was basket‐like without a bottom with a diameter of about 6 μm and was woven from two kind fibers about 0.08 and 0.19 μm. (c) There were two types of extrusomes under the pellicle. Using transmission electron microscopy，the Type I extrusomes showed narrow and long egg shape, its cross section was circular which is composed by various electronic density of concentric. Using the scanning electron microscope, they were two slightly thin clavate, the length was about 5 μm, the diameter of the middle section was about 0.75 μm, and the diameter of the two ends was about 0.32 μm, they were distributed abundantly between the microtubule fasciculi which were located on both sides of the gap on the feeding groove. Using transmission electron microscopy, the Type II extrusomes showed egg shape. Using the scanning electron microscopy, they were about 1.6 × 0.8 μm in size, they were distributed abundantly under the body pellicle while rarely the proboscis. In addition, many different of developmental stages two types of extrusomes could be also seen in the cytoplasm. (d) There were very well‐developed fibrous systems under the pellicle that were woven from fibers about 0.14 μm in diameter that attached to the pellicle and bound some organelles in the cytoplasm (e.g., mitochondria, extrusomes) and other structures to the cytoplasm and maintained cell morphology. The results of this study not only supplement and enrich the morphological contents of the Dileptus sp., but also provide the basis for the study of the taxonomy of the Dileptus sp. It also provides a new method for researchers to explore the morphology and structure of ciliate cells under the cortex by SEM.     

四川某稀土矿选矿试验研究

针对四川某稀土矿选矿工艺存在的稀土回收率低的问题，开展了一系列选矿试验研究。试验结果表明，在矿浆质量浓度为30%，粗选NaOH用量为600g/t，水玻璃用量为3000g/t，EF1106用量为3500g/t，起泡剂用量为60g/t情况下，采用一粗、三精、两扫、中矿按顺序返回的选矿流程，可获得稀土REO的品位和回收率分别为66.32%和79.88%的稀土浮选精矿。与该选厂的生产指标相比，稀土回收率提高了13.93%。     

高速飞行器燃油热管理系统飞行热航时

目前高速飞行器机载热负荷呈指数上升趋势，而由于气动加热作用，机身温度随航时增长也持续上升，这两者严重限制了高速飞行器的续航时间和电子设备的使用时长。燃油作为飞行器所必须携带的大比热容液体工质，是机载热沉的优选。燃油热沉利用会受气动加热、耗油量、飞行时长的综合影响。本文以机载燃油热沉为核心，研究高速飞行器燃油热管理系统参数设计对飞行热航时的影响。建立了燃油-消耗性冷却剂热利用系统的动态特性方程，并提出热航时的概念以衡量热负荷作用下燃油不发生超温的飞行时长，详细讨论了上述各影响因素与热利用系统参数对热航时的影响。上述研究可为高速飞行器热管理系统设计选型提供参考。     

应用新型高活性间苯二酚-甲醛树脂的载重轮胎胎体帘布胶低生热性能研究

研究新型高活性间苯二酚-甲醛树脂（间-甲树脂）SL3020LFR在载重轮胎胎体帘布胶中的应用，并与非间-甲树脂进行对比。结果表明：高活性间-甲树脂SL3020LFR胶料的硫化活性较高，其加工性能、老化前后的拉伸性能和粘合性能均符合载重轮胎胎体帘布胶的性能要求，尤其是胶料具有低动态滞后损失和低动态生热特性，将其用于载重轮胎胎体帘布胶中能够降低轮胎的滚动阻力和内部生热，提高耐久性能和翻新价值。     

硫酸根对离子膜电解工艺影响及处理

离子膜电解工艺中,硫酸根的影响有:硫酸根易与钙离子结合,降低氯气纯度,降低电解槽电流效率。提出去除硫酸根的方法有:钡法,钙法,碳酸钡法,树脂吸附法,膜法,以及膜法+冷冻结晶法。